[Postname]
Name=USBCNC_ATC
KopfZeile=

[Modul]
PostModul=
SIMModul=

[StartCommand]
Command1=%
Command2=(Count_Block) G00 G17 G21 G40 G54 G49
Command3=(Count_Block) G64P0.1 G80 G90 G94 G99
Command4=(Count_Block) (************ CondaCam 3.1 *************)
Command5=(Count_Block) ( Drawingn.-Name: (Filename) )
Command6=(Count_Block) ( Prog-Name: (NCFilename2) )
Command7=(Count_Block) (***************************************)
Command8=(Count_Block) ( Created on: (Date) )
Command9=(Count_Block) ( Customer:                                )
Command10=(Count_Block) ( Drawingn.-Nr.:                          )
Command11=(Count_Block) ( Material:                             )
Command12=(Count_Block) (***************************************)
Command13=(Count_Block) ( Stock Dimension in  X  Y  Z )
Command14=(Count_Block) ( X Min = X(BX-)  X Max = X(BX+) )
Command15=(Count_Block) ( Y Min = Y(BY-)  Y Max = Y(BY+) )
Command16=(Count_Block) ( Z Min = Z(BZ-)  Z Max = Z(BZ+) )
Command17=(Count_Block) (***************************************)
Command18=(Count_Block) ( ++++++ Used-Tools +++++++ )
Command19=(Count_Block) (TOOL_DATA)
Command20=(Count_Block) ( +++++++++++++++++++++++++++++++++++++ )
Command21=(Count_Block) (        PP Output for USBCNC          )
Command22=(Count_Block) (    *** -- Toolchange: -- ***     )
Command23=(Count_Block) ( Toolname:   (ToolName) )
Command24=(Count_Block) ( Toolnumber: T(TNr) )
Command25=(Count_Block) T(TNr) M06
Command26=(Count_Block)(SPINDLE_Block)
Command27=(Count_Block) G0 X(KFAx[0]) Y(KFAy[0])
Command28=(Count_Block) G0 Z(KFAz+[0])

[EndCommand]
Command1=(Count_Block) ( move into basic position )
Command2=(Count_Block) G0 G40 Z(KFAz+[20])
Command3=(Count_Block) S0 M05 M09
Command4=(Count_Block) M30 ( Program End )
Command5=%

[GENERAL]
BlockPrefix=
BlockEndPrefix=
Extension=.NC
Decimal=.
OutputPlus=
CommentStartChar=(
CommentEndChar=)
XYPlane= G17
YZPlane= G18
ZXPlane= G19
LinetoCircle=1
LinetoCircleToleranceFactor=1.2
LinetoCircleRadius_MAX=1500
LinetoCircleSegment_MAX=5
LinetoCirclePlane_Code=0
GModal=0
CountChar=N
NUMPlaces=0
Increment=5
StartUnit=100
Char1=
Char2=
Char3=
Count_Block=(CountChar)+(Count)
CoolOn=M08
CoolOff=M09
TimeFactor=1.3
ZAxisMaxFeedFactor=0.500000
OUTSCAL=1.000000

[LINEAR DEFINITION]
LinearMotion= G1
RapidMotion= G0
KoordxChar= X
KoordyChar= Y
KoordzChar= Z
DecimalPlaces=3
XFactor=1.0
YFactor=1.0
ZFactor=1.0
ShowZeros=1
LZERO=1
Char1=
Char2=
Char3=
G40Comp=(Count_Block) G40(\n)
G41Comp=(Count_Block) G41(\n)
G42Comp=(Count_Block) G42(\n)
XYZModal=1
LinearRegisterPosition=(CompOff)+(CompLeft)+(CompRight)+(Count_Block)+(Motion)+(KoordxChar)+(Koordx)+(KoordyChar)+(Koordy)+(KoordzChar)+(Koordz)+(FEEDRATE_Block)+(SPINDLE_Block)
RapidRegisterPosition=(CompOff)+(CompLeft)+(CompRight)+(Count_Block)+(Motion)+(KoordxChar)+(Koordx)+(KoordyChar)+(Koordy)+(KoordzChar)+(Koordz)

[ROUNDAXIS DEFINITION]
KoordaChar=
KoordbChar=
KoordcChar=
DecimalPlaces=
AFactor=
BFactor=
CFactor=
ShowZeros=
LZERO=
Char1=
Char2=
Char3=
ABCModal=0
CharCW=
CharCCW=
ARotaryLimitMin=-999999
ARotaryLimitMax=999999
BRotaryLimitMin=-999999
BRotaryLimitMax=999999
CRotaryLimitMin=-999999
CRotaryLimitMax=999999
AoppositeDirect=0
BoppositeDirect=0
CoppositeDirect=0
RadianOutput=0

[CIRCLE DEFINITION]
CIRCLE_R= G2
CIRCLE_L= G3
XZ_CIRCLE_R= G2
XZ_CIRCLE_L= G3
YZ_CIRCLE_R= G2
YZ_CIRCLE_L= G3
KoordiChar= I
KoordjChar= J
KoordkChar= K
RadiusChar= R
AngleChar= W
HelixChar=
I_Factor=1.0
J_Factor=1.0
KR_Factor=1.000000
W_Factor=1.000000
ShowZeros=1
Char1=
Char2=
Char3=
Char4=
Char5=
Char6=
Char7=
IJ_G91Modus=1
CIRCLE_Modal=0
HELIXINTP=0
CIRCLERegisterPosition=(Count_Block)+(Plane)+(CIRCLE)+(KoordxChar)+(Koordx)+(KoordyChar)+(Koordy)+(KoordzChar)+(Koordz)+(KoordiChar)+(Koordi)+(KoordjChar)+(Koordj)+(KoordkChar)+(Koordk)+(FEEDRATE_Block)+(SPINDLE_Block)
HELIXRegisterPosition=
CircleSplit=0
CirclePolygon=0

[SPINDLE DEFINITION]
SpindleChar= S
ClockwiseRotationR= M03
ClockwiseRotationL= M04
HighValue=24000.00
LowValue=100.00
Factor=1.00000
DecimalPlaces=0
Decimal=
ShowZeros=0
Char1=
Char2=
Char3=
SPINDLE_Modal=0
SPINDLE_Block=(SpindleChar)+(NUMMC)+(ClockwiseRotation)

[FEEDRATE DEFINITION]
FEEDRATEChar= F
HighValue=10000.0000
LowValue=1.0000
Factor=1.000000
DecimalPlaces=0
Decimal=
ShowZeros=0
Char1=
Char2=
Char3=
FEEDRATE_Modal=0
FEEDRATE_Block=(FEEDRATEChar)+(NUMMC)

[ToolChange]
Command1=(Count_Block) (    *** -- Toolchange: -- ***     )
Command2=(Count_Block) ( Toolname:   (ToolName) )
Command3=(Count_Block) ( Toolnumber: T(TNr) )
Command4=(Count_Block) M05 M09
Command5=(Count_Block) T(TNr) M06
Command6=(Count_Block)(SPINDLE_Block)
Command7=(Count_Block) G0 X(KFAx[0]) Y(KFAy[0])
Command8=(Count_Block) G0 Z(KFAz+[0])
XChangeP=0
YChangeP=0
ZChangeP=0

[TNr_Format]
NUMPlaces=1

[RegNr_Format]
NUMPlaces=1

[Comp_Format]
OutputPlus=
DecimalPlaces=3
ShowZeros=1

[SimConfig]
MESCAL=1.000000
TOSCAL=1.000000

[EntryCommand]
InsertAfter=0

[ExitCommand]
InsertAfter=0

[Cycle1]
CycleName=Drilling Cycle with chip breaking type G73
CyclePara=Approach height;Drilling depth;Depth Increment;
CycleType=0
SCommand1=(Count_Block) G99 G83 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)]) Q(KFA[(CQ)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle2]
CycleName=Left-hand thread with compensating chuck type G74
CyclePara=Approach height;Drilling depth;
CycleType=1
SCommand1=(Count_Block) M04
SCommand2=(Count_Block) G99 G84 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle4]
CycleName=Drilling Cycle type G81
CyclePara=Approach height;Drilling depth;
CycleType=3
SCommand1=(Count_Block) G99 G81 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle5]
CycleName=Drilling Cycle with dwell time type G82
CyclePara=Approach height;Drilling depth;;DWELL TIME AT DEPTH;
CycleType=4
SCommand1=(Count_Block) G99 G82 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)]) P(ABS[(P1)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle6]
CycleName=Deep Hole Peck Drilling Canned Cycle type G83
CyclePara=Approach height;Drilling depth;Depth Increment;
CycleType=5
SCommand1=(Count_Block) G99 G83 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)]) Q(KFA[(CQ)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle7]
CycleName=Right-hand thread with compensating chuck type G84
CyclePara=Approach height;Drilling depth;
CycleType=6
SCommand1=(Count_Block) G99 G84 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle8]
CycleName=Reaming Cycle Type G85
CyclePara=Approach height;Drilling depth;
CycleType=7
SCommand1=(Count_Block) G99 G85 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle9]
CycleName=Drilling cycle retraction with spindle stop type G86
CyclePara=Approach height;Drilling depth;
CycleType=8
SCommand1=(Count_Block) G99 G86 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle10]
CycleName=Back Boring Cycle  type G87
CyclePara=Approach height;Drilling depth;Off-center distance;
CycleType=9
SCommand1=(Count_Block) G99 G87 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(CR)]) R(KFA[(Z3)]) Q(KFA[(CQ)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle11]
CycleName=Fine boring cycle with dwell time and manual retract type G88
CyclePara=Approach height;Drilling depth;;DWELL TIME AT DEPTH;
CycleType=10
SCommand1=(Count_Block) G99 G88 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)]) P(ABS[(P1)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[Cycle12]
CycleName=Fine Drilling Cycle with dwell time  type G89
CyclePara=Approach height;Drilling depth;;DWELL TIME AT DEPTH;
CycleType=11
SCommand1=(Count_Block) G99 G89 X(KFAx+[0]) Y(KFAy+[0]) Z(KFA[(Z3)]) R(KFA[(CR)]) P(ABS[(P1)])(FEEDRATE_Block)
LCommand1=(Count_Block) X(KFAx+[0]) Y(KFAy+[0])
ECommand1=(Count_Block) G80

[CycleSimOptionen]
G80=;;;;;;;;
G73=;;;;;;;;
G74=
G76=
G81=
G82=
G83=
G84=
G85=
G86=
G87=
G88=
G89=
BORCYCLE_Z_INK=0
START_at_CALL=0

[USER]
TEXT=USBCNC with automatic tool measurement. Circles in all Planes. Circular arc parameter I,J,K = incremental.